Toughpower TF1 1550W 80+ Titanium Computer Power Supply
Designed for overclockers, user’s with high-end system demands, and more, the Toughpower TF1 Titanium 1550W delivers 80 PLUS Titanium efficiency to satisfy their needs. Besides the critical features like <30mV low ripple noise, extremely strict Voltage Regulation < ±2%, and Hold up time> 16 milliseconds, Thermaltake also added three vital features to make sure Toughpower TF1 Titanium 1550W can consistently and safely power up the whole system. Firstly, Low Transient Response Secondly, Inrush current <50 Ampere. Lastly, 12V OCP protection is covered. With all the advantages plus a 10-years warranty, the Toughpower TF1 Titanium 1550W can satisfy the market, where PC enthusiasts are looking for a premium power supply with all the latest features.
Turbo Fan Button
The turbofan button is designed to
maximize airflow intake around 2400±10% RPM to cool down the power supply when
it is in a full load. Users can easily push the button behind the PSU panel to
use this function.
Extra Jumper Accessory
The Toughpower TF1 Titanium 1550W
comes with an extra jumper to provide electricity to the system without
connecting to the motherboard. If you need more than one power supply to power
up your system, the extra jumper will help a lot.
Low Transient Response
The transient response is a
measure of how well the power source can hold its output constant in response
to load changes. We make sure that we can keep the results comply with 12V ＜ 1 %,
5V＜
3%, and 3.3V ＜
5% to avoid PSU output voltage deviation causing subsequent equipment
malfunction or even shut down.
Inrush current ＜ 50 Ampere
Inrush current is the
instantaneous high input current drawn by a power supply or electrical
equipment at turn-on. This arises because of the high initial currents required
to charge the capacitors, inductors, or transformers. We make sure that the
test results are under 50 ampere to avoid damage to the PSU components.
140mm Pulse Width Modulation Fan
Featuring a 140mm Pulse Width
Modulation Fan with intelligent RPM controls to help guarantee superior cooling
performance and near-silent operation.
＜30mV Low Ripple Noise
All ripples are lower than 30mV on
+12V, +5V or +3.3V from 0% to 100% load to ensure a stable operation and keep
your performance-critical components to function reliably for longer.
Extremely Strict Voltage Regulation ＜±2%
The voltage regulation, more
strict than Intel’s standard ±5% for major rails and ±10% for -12V, is set to
no more than ±2% for major rails to meet the highest performance.
Fully Modular Low-Profile Flat Cable
Offers cable selection for users
while powering the system at an advantageous voltage. Low-profile flat black
cable makes cable management easier, reduces clutter and increases airflow
inside the chassis.
Premium Japanese 105°C/221°F Capacitors.
Providing great durability as well
as offering the highest stability, while remaining reliable.
High Amperage Single +12V Rail
Powerful single +12V rail ensures
a stable and reliable supply to other PC components.
80 PLUS Platinum Certified and Intel C6/C7 States Ready
Toughpower TF1 Titanium 1550W
saves energy through its high energy efficiency up to 94% and is certified to
80 PLUS® Titanium. It has been optimized to work with all generations of
Intel’s processors to achieve maximum energy saving.
CYBENETICS - EFFICIENCY LEVEL CERTIFICATION - TITANIUM
Toughpower TF1 Titanium 1550W is
certified to CYBENETICS TITANIUM in terms of efficiency level. The TITANIUM
overall efficiency rating is defined as ≥91% to <93%. There are six ETA
certifications, covering an efficiency range from 82%. Besides the overall
efficiency of a PSU, ETA also takes into account its overall Power Factor
readings along with the efficiency of the 5VSB rail and the power that the unit
consumes in standby (also called phantom power).
CYBENETICS – NOISE LEVEL CERTIFICATION – STANDARD+ Ready
Toughpower TF1 Titanium 1550W is
certified to CYBENETICS STANDARD+ in terms of noise level. There are seven
noise level certifications, covering from dead silent PSUs (<15db[A]) to
quiet noisy ones(>40 db[A]). We use a solid methodology and states of the
art equipment to measure the noise that a PSU outputs throughout its entire
operation range, from almost zero noise output to full load
| SPECIFICATION | |
| MODEL NAME | TTP-1550AH3FCT |
| Colour | Black |
| MAX. OUTPUT CAPACITY | 1550W |
| WATTS | 1550W |
| PEAK OUTPUT CAPACITY | 1860W |
| RGB | No |
| PFC (POWER FACTOR CORRECTION) | Active PFC |
| POWER GOOD SIGNAL | 100-500 msec |
| HOLD UP TIME | > 16msec at 100% of full load |
| INPUT CURRENT | 18A max |
| INPUT FREQUENCY RANGE | 47Hz-63Hz |
| Protections | OCP, OVP, OPP, SCP, OTP |
| Input Voltage | 100V – 240V~ |
| COOLING SYSTEM | 14cm PWM fan |
| EFFICIENCY | Meet 80 PLUS® Titanium at 115Vac input. |
| MTBF | 120,000 hrs minimum |
| SAFETY APPROVAL | CE/cTUVus/TÜV/FCC/BSMI/EAC/ CCC |
| OPERATING HUMIDITY | 20% to 90%,non-condensing |
| PCI-E 6+2PIN | 8 |
| FORM FACTOR | ATX |
| WEIGHT | 2.4kg |
| Operating temperature | 0°C to + 50°C |
| Storage temperature | -20°C to + 70°C |
| DIMENSIONS | 150mm(W) x 86mm(H) x 180mm(D) |
| WARRANTY | 05 Years Warranty |
